Minutes, IBIS Quality Committee February 24, 2004 TIME AND PHONE FOR NEXT MEETING March 9, 2004 9-10 AM EST (6-7 AM PST) Phone: 408-902-7868 or 866-902-7868 Meeting access: Meeting ID: 42477825 ROLL CALL Adam Tambone Barry Katz *Benny Lazer Benjamin P Silva *Bob Ross Brian Arsenault Eckhard Lenski Eric Brock Gregory R Edlund Hazem Hegazy John Figueroa John Angulo *Katja Koller Kevin Fisher *Kim Helliwell Lance Wang Lynne Green Mike Labonte Peter LaFlamme *Robert Haller Roy Leventhal Sherif Hammad Todd Westerhoff Tom Dagostino Kazuyoshi Shoji Sadahiro Nonoyama Everyone in attendance marked by * NOTE: "AR" =3D Action Required. -----------------------MINUTES --------------------------- - We welcomed a new participant Benny Lazer. Benny stated he is an SI Engineer who is works for Alcatel(sp?) and is also an active IBIS model user. - Review of minutes for February 10, 2003 Minutes approved - Announcements EIA Call for Patent Disclosure: No company declared a patent. - AR Review AR Bob H. Add relevant IBIS Accuracy Handbook details (DONE) - Opens for new items No New items - Designcon04 East Summit SiSoft will work local logistics. Off line discussions are required. - Detailed Documentation review Continued Review of entire IQ_DOCUMENT.TXT Continued IQ document review @ 5.1.13 where we left off last time. Focused on checking levels and parenthetical comments. Bob H. did on-line editing of document during the call. We concluded that number of internal stages (5.13) and the internal stimulus (5.14) is useful information if available, but do not want to unnecessarily create additional burden to the model maker. Kim volunteered to reword these sections and we may move these comments at the end of the document. AR Kim to reword 5.13 and 5.14 Bob H. walked the committee through the major points and concerns in the correlation section. The intention is not to re-write the ibis accuracy handbook, but instead to leverage off of key pieces, include a reference and to minimize duplication of effort. Some of the difficulties is the Ibis Accuracy Handbook deals with correlation of both spice and bench simultaneously. Additionally there is the concept of a correlation level depending on how much effort the model developer plans on putting into the correlation effort. The committee members are asked and encouraged to review the correlation section and comment back to Bob H. We will initially leave out the graphics so that a text only version can be distributed. Eventually graphics can be included to better describe some of the checks. It would be useful to generate a example model that implements the details of the IBIS quality checklist and document. Once this is completed the document and example could be presented to the IBIS open forum for a broader review. The committees goals would then be met. Bob Ross suggested Bob H should give a tour of the IBIS Quality Document at Designcon East, similar to what was done with the IBIS Accuracy Specification in the past. Next meeting continue review and correlation section comments and re-review any areas of concern. Next meeting: March, 9 2004 9-10 AM EST (6-7 AM PST) Phone: 408-902-7868 or 866-902-7868 Meeting access: 42477825 Meeting ended at 9:55 AM Eastern Time.